NMR Fast Field Cycling Relaxometers SPINMASTER
StelarFFC NMR relaxometry is a non-destructive low-field magnetic resonance technique which is performed in the range of a few kHz up to around 100 MHz, depending on the instrument (unlike FT-NMR spectroscopy which tends to work with magnetic field strengths from 200 MHz upwards). The information obtained is connected to the molecular dynamics of a substance or complex material through the measurement of the nuclear spin-lattice constant 1/T1 over a large range of magnetic field strengths, which is carried out on the same instrument (relaxometer). The technique is particularly useful in revealing information on slow molecular dynamics which can only be carried out at very low magnetic field strengths. For a more detailed explanation see Fast Field Cycling NMR relaxometry (section below) and Relation of NMRD to molecular dynamics.
Examples of important molecular dynamics information which can be obtained through FFC NMR relaxometry:
- Characterization of rotational dynamics
Determination of thermal activation energies
Identification and distinction between different molecular dynamicsg. solid/liquid dynamics, fast/slow dynamics, inter-molecular/intra-molecular dynamics
Characterization of surface exchange effects with solvents and other small molecules
Characterization of porous systems and local diffusion effects
Characterization of translational diffusion in bulk and geometrically restricted environments
Identification of the presence of paramagnetic substances
Evaluation of MRI contrast agents (electronic relaxation, kinetics of exchange, coordination number, correlation times in the spectrum of re-orientation and diffusional dynamics of molecules)
Identification of effects connected to cross-linking in polymers
Separation of slow and fast motion relaxometric components in polymers (inter-chain and intra-chain interactions)
Separation of amorphous and crystalline contributions in solids
Determination of aggregation states of complex biomolecules such as proteins
Exploration of relaxation of interesting nuclei, such as 2H, 13C, 7Li, 19F, 23Na, etc.: structural information connected to the presence of a particular nucleus at a specific molecular site may be obtained.
SPINMASTER FFC2000 1T C/DC is a unique NMR instrument designed to measure the field dependence of the NMR longitudinal spin-lattice relaxation time, T1. The transverse spin-spin relaxation time, T2, may also be measured.
The SPINMASTER 1 tesla system allows measurement of NMRD profiles from a few kHz to a maximum operating magnetic field of 42.6 MHz (1H Larmor frequency) and is capable of multi-nuclear measurements (1H, 2H, 13C, 19F, 7Li, etc.).
SPINMASTER offers superb performance for numerous applications where investigation of molecular dynamics may provide the key to solving problems for which other analytical techniques cannot provide answers.
- Measurement of relaxation times from a fraction of a millisecond to several seconds
- Multi-nuclear operations
- Fully automated acquisition of NMRD profiles
- Efficient and accurate temperature control (range from -140 °C to +140 °C with a 0.1 °C resolution)
- Minimum operating costs (no cryogenic gases necessary)
- No complicated sample preparation required
- Measures solids, liquids, liquid crystals, colloids, complex mixtures
Wide Bore Configuration
SPINMASTER can also be configured with the Stelar Wide Bore 0.5 tesla magnet for measuring large samples such as rock cores.
Note on T2 measurements:
- The measure of T2 can be performed using a classical CPMG sequence at the acquisition field.
- The acquisition field and spectrometer frequency can be set continuously to different values according to the nucleus observed and frequency/field ranges
- The full dependence of T2 on the full range of magnetic field strengths can be studied using special FFC Spin Echo sequences, with some limitations for short T2.
FFC NMR relaxometry is a non-destructive low-field magnetic resonance technique which is performed in the range of a few kHz up to around 100 MHz, depending on the instrument (unlike FT-NMR spectroscopy which tends to work with magnetic field strengths from 200 MHz upwards). The information obtained is connected to the molecular dynamics of a substance or complex material through the measurement of the nuclear spin-lattice constant 1/T1 over a large range of magnetic field strengths, which is carried out on the same instrument (relaxometer). The technique is particularly useful in revealing information on slow molecular dynamics which can only be carried out at very low magnetic field strengths. For a more detailed explanation see Fast Field Cycling NMR relaxometry (section below) and Relation of NMRD to molecular dynamics.
Examples of important molecular dynamics information which can be obtained through FFC NMR relaxometry:
- Characterization of rotational dynamics
- Determination of thermal activation energies
- Identification and distinction between different molecular dynamicsg.solid/liquid dynamics, fast/slow dynamics, inter-molecular/intra-molecular dynamics
- Characterization of surface exchange effects with solvents and other small molecules
- Characterization of porous systems and local diffusion effects
- Characterization of translational diffusion in bulk and geometrically restricted environments
- Identification of the presence of paramagnetic substances
- Evaluation of MRI contrast agents (electronic relaxation, kinetics of exchange, coordination number, correlation times in the spectrum of re-orientation and diffusional dynamics of molecules)
- Identification of effects connected to cross-linking in polymers
- Separation of slow and fast motion relaxometric components in polymers (inter-chain and intra-chain interactions)
- Separation of amorphous and crystalline contributions in solids
- Determination of aggregation states of complex biomolecules such as proteins
- Exploration of relaxation of interesting nuclei, such as 2H, 13C, 7Li, 19F, 23Na, etc.: structural information connected to the presence of a particular nucleus at a specific molecular site may be obtained.
The magnetic field dependence of 1/T1 of any given substance or material is shown in the graphical form as a Nuclear Magnetic Resonance Dispersion (NMRD) profile. The NMRD shown below shows the different profiles of a foodstuff before (black squares, unspoiled) and after it has expired (red dots, spoiled).
Data produced from in-house studies at Stelar
The relaxation rate 1/T1 of a substance or material will tend to change when there is a variation in molecular dynamics, which may be caused by the following:
- change of state (g.solid to liquid; phase changes in complex systems such as liquid crystals)
- concentration changes (g.effect on aggregation states of biomolecules)
- temperature changes
- viscosity changes
- cofactor interactions such as sulfur-polymer coupling or plasticizer effects
- paramagnetic impurities
Changes in the relaxation rate, 1/T1, of a substance or material, are sometimes not evident at single magnetic field strengths, but when studied over a wide range of magnetic field strengths, as with FFC NMR relaxometry, changes are easier to identify as they are often more visible with the NMRD profile, especially at the lower magnetic field strengths.
Relation of NMRD to molecular dynamics
Molecular dynamics are generally rotational or translational motions that are modeled as small angle or small step translational jumps which occur randomly in time. The random functions of time are usually characterized by a time correlation function that characterizes the conditional probability that if there is a particular orientation or position at time t, what is the probability at time (t + τ) later? For Brownian rotational diffusion, the correlation function decays exponentially:
Where B2 is the strength of the coupling modulated and τc is the correlation time for the molecule to diffuse approximately one radian. Nuclei are relaxed by the transition induced by these fluctuating fields at the Larmor frequency (single quantum) and twice the Larmor frequency (double quantum) spin flips. What motions are important depends on the magnetic field strength experienced by the nuclei. The more intense the fluctuations are near the Larmor frequency, the faster the spins relax. The frequency dependence of the fluctuation intensity, i.e., the power spectrum or the spectral density, is the Fourier transform of the time correlation function. For rotation this becomes,
Which to within a constant has the form
Thus, the Nuclear Magnetic Resonance Dispersion (known as NMRD or MRD) maps the Larmor frequency dependence of the spectral density function that is related directly, by the Fourier transform, to the time correlation function characterizing molecular motions. Any motion that causes changes in the local fields contributes to the relaxation process including rotation, translation and chemical exchange among different chemical or physical environments.
A critical feature of NMRD is that it is possible to map spectral densities as low as 5-10 kHz which corresponds to a time regime in the vicinity of 30 microseconds, i.e., well into the range of chemical exchange events. Variations of the method permit exploration to lower frequencies.
Fast Field Cycling NMR relaxometry – a technical explanation
Fast Field Cycling (FFC) Nuclear Magnetic Resonance (NMR) relaxometry is a measurement of the nuclear spin-lattice relaxation rate constant as a function of the applied magnetic field strength that provides a unique characterization of the local molecular dynamics of molecules over a wide frequency range.
The spin-lattice-relaxation-rate constant (1/T1) characterizes the time dependence of the approach to thermal equilibrium for the nuclear spin magnetization if it is perturbed from equilibrium in a magnetic field. The process involves an exchange of energy between the nuclear spin energy and the other degrees of freedom in the system collectively called the lattice, even in a liquid. This energy exchange requires photons of energy corresponding to transitions between the nuclear spin energy levels that are a linear function of the magnetic field strength. The fluctuations that cause the coupling derive from molecular motions in the system ranging from vibrations at the highest frequencies to global fluctuations at the lowest frequencies. Varying the magnetic field strength varies the frequencies sampled by the relaxation rate measurement. By varying the magnetic field over wide ranges, it is possible to map the power spectrum of the fluctuations from a few kHz to hundreds of MHz corresponding to a time scale range from tens of microseconds to hundreds of ps. Incorporation of a paramagnet in the system permits exploration of dynamics to the sub picoseconds domain. One may think of nuclear magnetic relaxation dispersion (NMRD) as the magnetic analog of dielectric dispersion; however, NMRD has the distinct advantage that one generally has no difficulty identifying the origin of the motions that drives spin relaxation.
NMRD profile for bovine serum albumin in water at 200 mg/mL
The solid curve is a “fit” to the data assuming a single rotational unit (monomer). The fit fails because the solution is severely aggregated. As a consequence of the aggregation, the inflection point is shifted a decade to lower Larmor frequencies corresponding to much larger rotational units than a monomer, and the dispersion is broadened which reports through the rotational correlation times the distribution of apparent molecular sizes. The weighting of the contributions to the NMRD profile is proportional to the rotational correlation time, thus, the larger aggregates make a much larger contribution to the relaxation rate constant than the smaller ones.
The relaxation dispersion profiles for cross-linked bovine serum albumin samples at different compositions shown in semilogarithmic (a) and log-log (b) presentations.
The dispersion is predominantly a power law in the Larmor frequency for the rotationally immobilized protein cases or very large aggregates.
Fixed NRM x FFC Relaxometer
Practical difference between a fixed field magnet and a FFC relaxometer
A FFC relaxometer, such as the Stelar Spinmaster or SMARtracer, is a specialized system with a low field magnet (0.25, 0.5 or 1 Tesla) which is able to electronically switch the magnetic field strength required, from a few kHz up to the maximum magnetic field strength allowed by the magnet (up to 42 MHz 1H Larmor frequency with the 1 Tesla magnet) and which is able to overcome the limits of the NMR signal-to-noise ratio at low magnetic field strengths.
A standard fixed field magnet measures the relaxation rate constant 1/T1 with the limitation that it is unable to change the magnetic field strength of operation and thus is only able to measure 1/T1 at a single magnetic field strength. Fixed field time domain instruments generally operate in the range of 2 – 60 MHz.
The FFC relaxometer is able to measure 1/T1 at very low magnetic field strengths (down to a few kHz) which is of particular advantage as many molecular processes occurring in the range between nano-seconds and milli-seconds (slow molecular dynamics) are very difficult to measure at higher magnetic field strengths.
The NMRD profiles below, measured with a Stelar FFC NMR relaxometer, show three different weight distributions of polyethylene glycol (PEG) melts (blue squares 8,000 Da, black squares 20,000 Da, red squares 35,000 Da). This demonstrates how the ability to measure nuclear spin relaxation over a wide range of magnetic field strengths, and especially at very low magnetic fields, can be of advantage. It would be difficult to distinguish between these three different polymers at magnetic field strengths higher than 0.1 MHz.
Data produced from in-house studies at Stelar. Samples kindly provided by Dr. M. Fleury, IFPEN, Paris.
Technical difference between the fixed field and the NMRD experiment
The key difference between the fixed field experiment and the NMRD experiment is that the NMRD profile provides a test of the theory used to interpret the data in terms of the molecular dynamics in the system. Rotational motions are a simple example. The relaxation rate constant may be written for relaxation induced by rotational Brownian motion as:
The measurement of the field dependence characterizes the rotational correlation time, τ, as well as the strength of the coupling, B2, driving relaxation. However, one does not need to know B2 to extract the dynamical information because it derives from the Larmor frequency dependence entirely. In the fixed field experiment, the Larmor frequency, ω, is fixed. In this case, to extract τ, one needs to know B2 accurately. Further, there is no test of the assumptions in the theory for the fixed field measurement, but in the NMRD experiment, if the theory is inappropriate, it will not faithfully fit the NMRD profile.
How does the FFC experiment work?
FFC NMR relaxometry is a non destructive method requiring a small amount of a solid or liquid sample (enough to fill a standard 10mm NMR tube to a volume of around 1cm3) with no other form of preparation required. The Stelar wide bore magnet is able to accommodate larger samples such as rock cores or even small animals.
The basic FFC NMR experiment consists of cycling the Zeeman field, B0, which is applied to the sample, through three different values:
- In the first instance, a high magnetic field, Bpol(polarization field), is applied to pre-polarize the sample in order to boost signal intensity.
- The sample is then allowed to relax in a second field, Brelax(relaxation field), which can be set to any desired value, including zero.
- Finally, the field is set to the detection field, Bacq(acquisition field), for signal acquisition.
All Stelar relaxometers come with a specialized software which will guide the user through the FFC experiment and calculate the necessary running time.
- Application Note - Fast Field Cycling NMR Relaxometry on Hetero-Nuclei
- Application Note - Fast Field Cycling Relaxometry Application to Polymers
- Application Note - Inversion of Multi-Component FFC-NMR Relaxation Decays
- Application Note - NMR Relaxometric Investigations to Improve Efficacy of MRI Contrast Agents
- Fast Field Cycling Applications Brochure
- Fast Field Cycling NMR Relaxometry Brochure