8600 Series VSM
View in 
get a quote

8600 Series VSM

Lake Shore

8600 Series VSM

More science, less time

Advanced measurement performance

The 8600 Series vibrating sample magnetometer raises the bar for magnetometer performance and convenience. These VSMs combine high sensitivity (15 nemu), rapid measurement speed (10 ms/pt), and simple operation for more accurate measurements, faster.






Convenient operation

The entire 8600 Series system has been reimagined with a focus on clean, ergonomic design that simplifies the researcher’s interaction with the system. A motorized head brings the sample to a comfortable height for easy, one-handed exchange of the QuickLIGN™ sample rods. Temperature options include a cryostat, high-temperature oven, and single stage variable temperature insert. The combined temperature range of the options is 4.2 K to 1273 K. All three GlideLOCK™ options quickly slide into place and are auto-detected, with the software automatically displaying controls for the specific option. The magnet poles are also easily adjusted with the ExactGAP™ indexed positioning system that allows the pole gap to be set at one of six repeatable positions, eliminating the need to recalibrate after each change.

 

Designed for FORC

This VSM was created with first order reversal curve (FORC) measurement as a primary objective. FORC analysis is greatly enhanced by the high sensitivity of the 8600 Series vibrating sample magnetometer. FORC also benefits from increased data point density, and the new VSM flies through complex FORC data collection sequences in a fraction of the time required on previous systems.

 

Download our FREE FORC measurements ebook

Flexible and adaptable

The system’s software simplifies control of the VSM. Standard predefined measurement routines are combined with configurable field and measurement loops to provide a flexible data acquisition environment. In addition, the software features an integrated scripting tool, which enables the user to extend the existing routines with an open-ended software scripting language that can be used to perform customized measurement protocols and interface with third-party lab equipment.

 

8600 Series Features

  • 15 × 10-7 emu noise floor at 10 s/pt
  • 10 ms/pt data acquisition rate
  • 10,000 Oe/s field ramp rate
  • Rapid, repeatable temperature option exchange
  • High stability—±0.05% per day
  • Fields to 3.26 T
  • Widest available temperature range — 4.2 K to 1273 K

8600 Series VSM Specifications

APPLIED FIELD STRENGTH WITH HIGH FIELD POLE CAPS (±1%)

Gap indices 4 and 6 support non-VSM applications

Sample space

Sample size with option

8604 maximum field
—all modes

Maximum ramp rate
10 kOe/s (1 T/s)

8607 maximum field
—high field mode

Maximum ramp rate
dependent on ExactGAP setting*

8607 maximum field
—high speed mode

Maximum ramp rate
10 kOe/s (1 T/s)

ExactGAP™ Index 1

3.5 mm (0.14 in)

N/A

27.6 kOe (2.76 T)

32.6 kOe (3.26 T)

24.0 kOe (2.4 T)

ExactGAP™ Index 2

8 mm (0.31 in)

N/A

25.2 kOe (2.52 T)

30.1 kOe (3.01 T)

21.0 kOe (2.1 T)

ExactGAP™ Index 3

16 mm (0.63 in)

6.4 mm (0.25 in)
with SSVT

20.3 kOe (2.03 T)

26.2 kOe (2.62 T)

19.0 kOe (1.9 T)

ExactGAP™ Index 5

24 mm (0.94 in)

6.4 mm (0.25 in)
with oven or cryostat

15.5 kOe (1.55 T)

23.1 kOe (2.31 T)

15.0 kOe (1.5 T)

*ExactGap 1 or 2 maximum ramp rate = 5 kOe/s (0.5 T/s); ExactGap 3 maximum ramp rate = 4 kOe/s (0.4 T/s); ExactGap 5 maximum ramp rate = 3 kOe/s (0.3 T/s)



APPLIED FIELD STRENGTH WITH STANDARD POLE CAPS (±1%)

Gap indices 4 and 6 support non-VSM applications

Sample space

Sample size with option

8604 maximum field
—all modes

Maximum ramp rate
10 kOe/s (1 T/s)

8607 maximum field
—high field mode

Maximum ramp rate
dependent on ExactGAP setting*

8607 maximum field
—high speed mode

Maximum ramp rate
10 kOe/s (1 T/s)

ExactGAP™ Index 1

3.5 mm (0.14 in)

N/A

26.1 kOe (2.61 T)

31.2 kOe (3.12 T)

23.0 kOe (2.30 T)

ExactGAP™ Index 2

8 mm (0.31 in)

N/A

23.7 kOe (2.37 T)

28.9 kOe (2.89 T)

20.3 kOe (2.03 T)

ExactGAP™ Index 3

16 mm (0.63 in)

6.4 mm (0.25 in)
with SSVT

19.6 kOe (1.96 T)

25.3 kOe (2.53 T)

18.5 kOe (1.85 T)

ExactGAP™ Index 5

24 mm (0.94 in)

6.4 mm (0.25 in)
with oven or cryostat

15.4 kOe (1.54 T)

22.3 kOe (2.23 T)

14.5 kOe (1.45 T)

*ExactGap 1 or 2 maximum ramp rate = 5 kOe/s (0.5 T/s); ExactGap 3 maximum ramp rate = 4 kOe/s (0.4 T/s); ExactGap 5 maximum ramp rate = 3 kOe/s (0.3 T/s)



MOMENT MEASUREMENT

Noise floor (emu RMS)

Room temperature

0.1 s/pt

150 nemu

1 s/pt

60 nemu

10 s/pt

15 nemu

With oven or cryostat option, 10 s/pt

300 nemu

With SSVT option 10 s/pt

90 nemu

With vector coil option

x coils: 90 nemu at ExactGAP 3; y coils: 200 nemu at ExactGAP 3

Dynamic range

25 × 10-9 to 103 emu

Moment stability

Better than ±0.05% of full scale/day for fixed coil geometry at constant field and temperature

Reproducibility

Better than ±0.5% of reading, or ±0.1% of full scale, fixed rotation angle and range, with sample replacement

Moment accuracy

Better than 1% of reading ±0.2% of full scale with a geometrically identical test sample and calibrant

Sample mass

0 to 10 g

FIELD MEASUREMENT

Field accuracy

1% of reading or ±0.05% of full scale

Field resolution

1 mOe

Field ramp rate

8604: 10,000 Oe/s
8607: 10,000 Oe/s (in high-speed mode; reduced when in high field mode)

Closed loop field control stability

1 mOe

SAMPLE ROTATION

Setting resolution

0.1°

Setting reproducibility

<1°

Rotation range

Continuous

CERTIFICATIONS

CE

Yes

Application of Council directives

2014/35/EU Low Voltage Directive
2014/30/EU EMC Directive
2011/65/EU RoHS Directive

Standard to which conformity is declared

EN61010-1: 2010 Overvoltage Category II, Pollution Degree 2;
EN61326-1: 2013 Class A, Controlled EM Environment;
EN55011: 2009 Class A, Controlled EM Environment
EN50581: 2012

UTILITIES

Total system cooling water power dissipation (50 or 60 Hz) — see available recirculating chillers

8604: 4250 W
8607: 13400 kW

Note: chiller power specifications listed are for 100% duty cycle. Many common magnet testing applications such as hysteresis loops will not require as much cooling power. Please consult Lake Shore for chiller recommendations for your specific applications.



8600 Series VSM equipment

 

8604

8607

VSM head drive

Gen2

VSM frame

V-mag

Control electronics

Model 737

Bipolar magnet power supply

Model 643

Model 648

Maximum output

±35 V/±70 A (2,450 W)

±75 V/±135 A (9.1 kW nominal)

AC line input

200/208 VAC ±10%, 13 A/phase;
220/230 VAC ±10%, 12 A/phase;
380 VAC ±10%, 7 A/phase;
400/415 VAC ±10%, 6.5 A/phase at 50/60 Hz

200 VAC ±5%, 41 A/phase;
208 VAC ±5%, 40 A/phase;
220 VAC ±5%, 38 A/phase;
230 VAC ±5%, 37 A/phase;
380 VAC ±5%, 23 A/phase;
400 VAC ±5%, 21 A/phase;
415 VAC ±5%, 21 A/phase

Cooling water requirements

Tap water or closed cooling system
(optional chiller available) +15 °C to +30 °C

Flow rate

5.7 L (1.5 gal)/min minimum

7.6 L (2.0 gal)/min minimum

Pressure drop

10 kPa (1.5 psi) at 5.7 L (1.5 gal)/min
minimum for power supply only

159 kPa (23 psi) at 7.6 L (2 gal)/min
minimum for power supply and mandatory flow switch

Electromagnet

Model EM-4V

Model EM-7V

Pole diameter

100 mm (4 in)

180 mm (7 in)

Pole cap face diameter

50 mm (2 in)

50 mm (2 in)

Field homogeneity

±0.1% over 1 cm3 (0.4 in3)

±0.1% over 1 cm3 (0.4 in3)

Cooling water requirements

Tap water or closed cooling system
(optional chiller available)

Inlet temperature

15 to 25 °C (59 to 77 °F)

15 to 32 °C (59 to 89 °F)

Flow rate

7.6 L (2 gal)/min

11.4 L (3 gal)/min

Pressure drop

200 kPa (30 psi)

220 kPa (32 psi)

Water chiller capacity

2.5 kW (8,530 BTU)/h

5 kW (17,060 BTU)/h

Hall probe

86-0911

Sense coils

Model 86-SC and Model 86-LC

Instrument console

483 mm (19 in) rack



8600 Series VSM option specifications

Model 86-CRYO variable temperature cryostat

With LHe

Temp range

4.2 K (base), 5.5 K to 450 K (control)

Temp stability

±0.1 K

With LN2

Temp range

77.6 K (base), 85 K to 450 K (control)

Temp stability

±0.2 K

Temperature resolution

0.001 K

Cool-down time

5 min (15 min initial cool-down)

Operation method

Continuous flow

LHe liquid usage

<1 L/h when operating >7 K

LN2 liquid usage

<1 L/h when operating >85 K

Insulation

Vacuum

Sample zone dimensions

Bore size

7.1 mm (0.28 in)

Outside diameter

22.4 mm (0.88 in)

More information about VSM options

 

Model 86-OVEN high temperature oven

Temperature range

308 K to 1273 K

Temperature stability

±0.1 K

Temperature resolution

0.001 K

Nominal ramp rate

5 K/min

Insulation

Vacuum plus multiple reflective shields

Sample zone dimensions

Bore size

7.3 mm (0.29 in)

Outside diameter

19 mm (0.75 in)

More information about VSM options

 

Model 86-SSVT single stage variable temperature option

Temperature range

78 K (base), 100 K to 950 K (control)

Temperature stability

0.1 K RMS

Temperature resolution

0.001 K

Gasses

LN2 and nitrogen gas for T<350 K;
argon for T>350 K

Cool-down time

40 min from room temp to 100 K

Nominal ramp rate
(in the domain)

Up to 8 K/min

Operating method

Continuous flow

LN2 liquid usage

0.5 L/h >100 K to 350 K

Nitrogen gas usage

~3 L/min 100 K to 350 K

Argon gas usage

~3 L/min

Insulation

Vacuum

Sample zone dimensions

Bore size

7.8 mm (0.31 in)

Outside diameter

12.7 mm (0.5 in)

More information about VSM options