Buy Your Consumable
-
PRS L100 F500 SCD Part Number: PRS-L100-F500-SCD
Quantity included: 1 - 20
Piezoresistive 100x48 μm self-sensing silicon cantilever with a single crystal diamond (SCD) tip bonded on our standard PCB (6x5 mm) with a 10 pin connector
Leaflet/Specs Add to cart -
PRS L100 F500 TL Part Number: PRS-L100-F500-TL
Quantity included: 1 - 20
Piezoresistive 100x48 μm self-sensing silicon tipless (TL) cantilever
Leaflet/Specs Add to cart -
PRS L450 F30 TL Part Number: PRS-L450-F30-TL
Quantity included: 1 - 20
Piezoresistive 450x100 μm self-sensing silicon tipless (TL) cantilever
Leaflet/Specs Add to cart -
PRS L70 F900 Si Part Number: PRS-L70-F900-Si
Quantity included: 1 - 20
Piezoresistive 70x30 μm self-sensing silicon cantilever with silicon tip
Leaflet/Specs Add to cart -
PRSA L300 F50 SCD Part Number: PRSA-L300-F50-SCD
Quantity included: 1 - 20
Piezoresistive 300x100 μm self-sensing silicon cantilever with a single crystal diamond tip (SCD) and a heater bonded on our standard PCB (6x5 mm) with a 10 pin connector
Leaflet/Specs Add to cart -
PRSA L300 Fxx Si Part Number: PRSA-L300-Fxx-Si
Quantity included: 1 - 20
Piezoresistive 300x100 μm self-sensing silicon cantilever with silicon tip and meander shaped heater
Leaflet/Specs Add to cart -
PRSA L300 Fxx TL Part Number: PRSA-L300-Fxx-TL
Quantity included: 1 - 20
Piezoresistive 300x100 μm self-sensing silicon tipless (TL) cantilever with heater
Leaflet/Specs Add to cart -
PRSA L400 F30 SCD Part Number: PRSA-L400-F30-SCD
Quantity included: 1 - 20
Piezoresistive 400x100 μm self-sensing silicon cantilever with a single crystal diamond (SCD) tip bonded on our standard PCB (6x5 mm) with a 10 pin connector
Leaflet/Specs Add to cart -
PRSA L400 F30 Si Part Number: PRSA-L400-F30-Si
Quantity included: 1 - 20
Piezoresistive 400x100 μm self-sensing silicon cantilever with silicon tip and rectangle heater
Leaflet/Specs Add to cart -
PRSA L400 F30 TL Part Number: PRSA-L400-F30-TL
Quantity included: 1 - 20
Piezoresistive 400x100 μm self-sensing silicon tipless (TL) cantilever
Leaflet/Specs Add to cart -
SS Starter Kit Pre-Amp v3 Part Number: SS-Starter-Kit-Pre-Amp-v3
Quantity included: 1 - 20
The kit consists of:
1.) Pre-amplifier [BW: 2.5 MHz, low noise, 100x gain, fixed 2V or flexible bridge supply voltage, onboard as well as external offset voltage],
2.) Flex counter part PCB [l=12cm],
3.) Output cable [shielded, l=100cm] and
4.) 2 boxes a 10 pieces self-sensing standard cantilevers (Si-tip or tipless), same type (=> please specify cantilever type when order).
Leaflet/Specs Add to cart